GM 950i 220mhz

The General forum is where users can discuss any topic regarding Motorola communications equipment - hardware, software, etc. There are also several focused forums on this board, so please take the time to ensure that your questions doesn't fall into one of those categories before posting here!

Moderator: Queue Moderator

Post Reply
Sharkman
New User
Posts: 3
Joined: Tue Nov 16, 2010 3:32 pm

GM 950i 220mhz

Post by Sharkman »

I recently acquired a GM 950i, in near new condition. I have heard conflicting stories on which software is used to program it. The Motorola tech I contacted was not familiar with this radio, nor on what type of software is used to program it. Can anyone point me in the direction of which software is used, so that I can proffer up this information to the Motorola Tech that I know, who can program most Motorola radios?
Thanks
User avatar
fineshot1
Posts: 1125
Joined: Wed Oct 12, 2005 5:13 am

Re: GM 950i 220mhz

Post by fineshot1 »

Not sure but I believe the GM950i is a south east asian model and most likely
the cps used will have to accept that SE Asian region code.
fineshot1
NJ USA
Sharkman
New User
Posts: 3
Joined: Tue Nov 16, 2010 3:32 pm

Re: GM 950i 220mhz

Post by Sharkman »

Thanks. I appreciate the input. I think I am just going to have to contact Motorola, to get more information on it.
User avatar
fineshot1
Posts: 1125
Joined: Wed Oct 12, 2005 5:13 am

Re: GM 950i 220mhz

Post by fineshot1 »

Good luck - please post back with the results.

Happy holidays....
fineshot1
NJ USA
Post Reply

Return to “General Motorola Solutions & Legacy Radio Discussion”