Ok. Here is what I want to do. I would like to program a specific channel to transmit an A-B/A-C set of tones on my EX560. I though I was doing this right in the quick call menus of the programming software but when I got the radio all programmed to the way I thought it would work, it didn't work. Any thoughts?
Thanks,
Nick
EX560-XLS Quick Call Programming
Moderator: Queue Moderator
-
nick.dejohn
- Posts: 314
- Joined: Sun Feb 22, 2004 6:06 pm
- What radios do you own?: EX560-XLS CDM1550
-
HLA
- Posts: 2334
- Joined: Mon Jul 11, 2005 8:15 pm
- What radios do you own?: HT1550's, X9000's, CDM1550's
Re: EX560-XLS Quick Call Programming
if it's like the ht1550 you can't assign it to a specific channel. you have to bring it up in the menu and when you push the transmit button it will send out the tones on whatever channel the radio is on. but you have to enable it in the menu and select it thru there
HLA
I never check PM's so don't bother, just email me.
I won't reply to a hotmail, gmail, aol or any other generic free address, if you want me to reply use a real address.
STOP ASKING ME FOR SOFTWARE OR FIRMWARE, I JUST FORWARD ALL OF THE REQUESTS TO THE MODERATORS
I never check PM's so don't bother, just email me.
I won't reply to a hotmail, gmail, aol or any other generic free address, if you want me to reply use a real address.
STOP ASKING ME FOR SOFTWARE OR FIRMWARE, I JUST FORWARD ALL OF THE REQUESTS TO THE MODERATORS
-
nick.dejohn
- Posts: 314
- Joined: Sun Feb 22, 2004 6:06 pm
- What radios do you own?: EX560-XLS CDM1550
Re: EX560-XLS Quick Call Programming
Yeah thats where Im at right now. I can send the tones out that way, but I was hoping to make it a little easier. Thanks anyways.
Nick
Nick
Nick