spectra b5 to c5 bitbanging

The General forum is where users can discuss any topic regarding Motorola communications equipment - hardware, software, etc. There are also several focused forums on this board, so please take the time to ensure that your questions doesn't fall into one of those categories before posting here!

Moderator: Queue Moderator

Post Reply
n3obl
Posts: 605
Joined: Tue Mar 26, 2002 4:00 pm

spectra b5 to c5 bitbanging

Post by n3obl »

I bitbanged a b5 to c5 and it has ver 6.16 mlm in it. The radio still does not show id's on trunk system. Do i need to load a c5 codeplug in to enable that also.

Frank
Top
motorola_otaku
Posts: 1854
Joined: Tue Jan 13, 2004 7:03 am

Re: spectra b5 to c5 bitbanging

Post by motorola_otaku »

As far as I know, no analog trunking Spectra except for the C9 with the Sys9000 head could be made to display individual IDs. And even then it wasn't like how the Astro radios do it.. it would display the Motorola channel number and the user ID in hex simultaneously.
Top
RADIOMAN2002
Posts: 1102
Joined: Thu Apr 04, 2002 4:00 pm
What radios do you own?: More than I can count

Re: spectra b5 to c5 bitbanging

Post by RADIOMAN2002 »

I'm not sure it even does that, I have an A-9 on a local system with ID display enabled and it shows nothing. I was wondering if the system controller has to put that information out for the mobile to decode it.
Top
Post Reply

Return to “General Motorola Solutions & Legacy Radio Discussion”