Saber RSS Adjusting TX PL Deviation (Saber 1E UHF)

The General forum is where users can discuss any topic regarding Motorola communications equipment - hardware, software, etc. There are also several focused forums on this board, so please take the time to ensure that your questions doesn't fall into one of those categories before posting here!

Moderator: Queue Moderator

Post Reply
User avatar
cracked
Posts: 142
Joined: Thu Oct 11, 2001 4:00 pm

Post by cracked »

Have a problem here trying to set TX PL deviation via Saber RSS 07.01.00. In Service -> Align Channel Parameters there are settings for Reference mod, VCO mod, etc., BUT the only zone/ch I can seem to align is zone1/ch1, as marked at the bottom of the screen. how can i select another zone/channel to align? i'm having trouble with high TX PL deviation on Zone 2, so setting Z1/CH1 does no good.
Top
clavo
Worse than Cowthief
Posts: 515
Joined: Mon Oct 15, 2001 4:00 pm

Post by clavo »

Turn the channel knob when you are tuning to get another channel
Top
Post Reply

Return to “General Motorola Solutions & Legacy Radio Discussion”