Ht-1250LS+

[vamedic826]

I have tried to programming some new HT-1250ls+ with the Current Moto CPS. The Problem that I am having is that when the Radio's are powered up the Display says unprogrammed. But when when you move the Rotary Dial the Channel change properly and when you go back to the Ch. in the 1 Position the correct alis comes up then changes back to unprogrammed. If you attempt to Key up on the Channel all you get is a continuous tone.

[wavetar]

Go into each conventional personality, and ensure the 'option board' is unchecked. If checked, the radio will attempt to 'read' the Passport option board, and assume it wants to work on a Passport trunking system.

[HLA]

you have to assign each personality to a channel position. expand the personality assignment to zone, double click on the zone, the use the drop down box to assign your personalitys to a position on the channel selector

[vamedic826]

Thanks for the responses. Something on the Option Borad was checked

[borisf]

Thanks for the responses. Something on the Option Borad was checked

Problem solved.