No luck searching BBS for answer... I want to get a seller to do a readout of an Astro Saber to determine the ROS/DSP version and the flash code to determine what the radio is worth, but I am not familiar with the radio button functions.
Is there a sequence of button pushing to get the radio to read out that info similar to an XTS3000?
Thanks.
Pierre
Astro Saber Service Mode - How to?
Moderator: Queue Moderator
-
AL7OC
- Posts: 179
- Joined: Fri May 21, 2010 1:13 am
- What radios do you own?: Motorola, Icom, Thales, Tekk
Astro Saber Service Mode - How to?
Pierre
AL7OC
AL7OC
Re: Astro Saber Service Mode - How to?
It's one of the buttons under the PTT. I can't remember if it's the left or the right, so try pressing one 5 times in rapid succession, and if that doesn't work, press the other button.
HTH
HTH
The bandsplit is only a suggestion.
-
N6LAU
- Posts: 382
- Joined: Mon Apr 14, 2008 12:42 am
- What radios do you own?: Talkabout-250 w/ P25 Phase 2
Re: Astro Saber Service Mode - How to?
bezking wrote:It's one of the buttons under the PTT. I can't remember if it's the left or the right, so try pressing one 5 times in rapid succession, and if that doesn't work, press the other button.
HTH
Should be the one with two raised dots (:).
Joe - N6LAU