Thanks for the help and posts

This forum is for discussions regarding all aspects of Motorola radio programming, including hardware, computers, installation and use of RSS/CPS, firmware upgrades, and troubleshooting. There are subforums for discussions of codeplugs, and also for software/firmware release notes and issues.

Moderator: Queue Moderator

Post Reply
User avatar
Greg Carttar
Posts: 15
Joined: Fri Apr 05, 2002 4:00 pm
What radios do you own?: MTRs, HTs, CDMs, digitacs,

Thanks for the help and posts

Post by Greg Carttar »

Thanks to the posts on this and the 800mhz Maxtrac thread, I successfully converted a 35W Privacy Plus Maxtrac to a 16 channel conventional with apparently all functions of the 16 pin connector working and programmable.

I had a bunch of 16-pin UHF Maxtrac 300's on the shelf and I robbed the firmware chip from one of them.

Took me a couple of tried to figure out what model family I needed, finally found the "Maxtrac with accessories" entry and away it went.

Lots of guys ask questions and lurk....I just wanted to say thanks to all the wizards.

Best Regards,

Greg Carttar
Top
Post Reply

Return to “Radio Programming”