MCS2000 Model III DTMF

The General forum is where users can discuss any topic regarding Motorola communications equipment - hardware, software, etc. There are also several focused forums on this board, so please take the time to ensure that your questions doesn't fall into one of those categories before posting here!

Moderator: Queue Moderator

Post Reply
salty
New User
Posts: 2
Joined: Wed Jul 27, 2011 7:45 pm

MCS2000 Model III DTMF

Post by salty »

Would I be able to use the numerical keypad on the MCS2000 Model III control head to key up DTMF tones to get into an IRLP node even if I don't have a DTMF microphone?

Thanks.
Top
MP 6.7
Posts: 109
Joined: Mon Aug 22, 2005 11:00 am
What radios do you own?: Spectra, Maxtracs, MT2k, GP300

Re: MCS2000 Model III DTMF

Post by MP 6.7 »

Yes. Make sure "Hot Keypad" is enabled in Tx Options in the personality window. Hold PTT and dial your digits. If you want to hear the DTMF when you transmit, enable DTMF Sidetone in Dialing in the Phone Configuration window.
Dale
KE7CEU
Current radios
Mobiles: 3x D43 A7 Spectras, T83 A9 Spectra, 2x KLM and 2x KLN MCS2000's, D43 Maxtrac 32ch, D35 Maxtrac 6ch modded for 896MHz receive, M33 M1225 4ch, Lowband Maratrac on 6 meters
Portables: 2x VHF GP300, VHF P110, UHF P110, VHF A7 MT2000
Top
salty
New User
Posts: 2
Joined: Wed Jul 27, 2011 7:45 pm

Re: MCS2000 Model III DTMF

Post by salty »

Excellent!

Thanks for the info, Dale!
Top
Post Reply

Return to “General Motorola Solutions & Legacy Radio Discussion”