D43LRA77A5CK programming issues

[cwolf520]

All,

I have a Motorola Radius (looks like a GM300 or Maxtrac) and have the MOT MBL programming software. I am using a Mot RIB box with an AC adapter and the cable that I use to program GM300 and CDM radios and cannot get to read the units code plug. I am using a computer with dual boot that can get me into Win 98. I also have a computer that does Win 95 and can boot into DOS. I get the same results with each computer.

Do I have to press a special key to read the radio?

Some information about the radio:

FCC ID ABZ89FT3730
TANAPA HUD3307B 9250
Model D43LRA77A5CK
Serial 778TSY9082
Doc type MJHA
Doc Number 109193276i

Thanks

Chuck
KC2QPD


Motorola Radius – similar to gm300/maxtrac

[Jim202]

All,

I have a Motorola Radius (looks like a GM300 or Maxtrac) and have the MOT MBL programming software. I am using a Mot RIB box with an AC adapter and the cable that I use to program GM300 and CDM radios and cannot get to read the units code plug. I am using a computer with dual boot that can get me into Win 98. I also have a computer that does Win 95 and can boot into DOS. I get the same results with each computer.

Do I have to press a special key to read the radio?

Some information about the radio:

FCC ID ABZ89FT3730
TANAPA HUD3307B 9250
Model D43LRA77A5CK
Serial 778TSY9082
Doc type MJHA
Doc Number 109193276i

Thanks

Chuck
KC2QPD


Motorola Radius – similar to gm300/maxtrac

It might help if you indicated which software your trying to read the radio with. There is the slight possibility that it is not the correct one.

Jim

[Will]

That IS a Radius mobile and requires radmbl.exe RSS that MUST run under DOS. Not a DOS window, full boot into DOS only.

[cwolf520]

Thanks Jim and Will. I will try the DOS boot tomorrow when I get back into the office. I actually have a computer that has 6.22 installed with Win 3.

Jim, I will get the model numbers of the software being used. I have the RADMBL.exe program, but may have had it running under the Win95 DOS.

I will let you know how everything works out.

Chuck
KC2QPD

[Max-trac]

Speaking of RADMBL, what was the newest version released??
Thanks

Thanks Jim and Will. I will try the DOS boot tomorrow when I get back into the office. I actually have a computer that has 6.22 installed with Win 3.

Jim, I will get the model numbers of the software being used. I have the RADMBL.exe program, but may have had it running under the Win95 DOS.

I will let you know how everything works out.

Chuck
KC2QPD