CDM1250's With Different Model Numbers

This forum is for discussions regarding all aspects of Motorola radio programming, including hardware, computers, installation and use of RSS/CPS, firmware upgrades, and troubleshooting. There are subforums for discussions of codeplugs, and also for software/firmware release notes and issues.

Moderator: Queue Moderator

Post Reply
jchabalie
New User
Posts: 50
Joined: Thu May 22, 2008 8:23 am
What radios do you own?: CDM1250, HT1250's

CDM1250's With Different Model Numbers

Post by jchabalie »

My fire company has 2 UHF CDM1250's with different model numbers (AAM25SKD9PW2AN and M25SKD9AA2A). Is there any way to program these with the same codeplug, or will I need to write the programming for each radio since they have different model numbers?
Top
Jim202
Posts: 3610
Joined: Sun Sep 09, 2001 4:00 pm

Re: CDM1250's With Different Model Numbers

Post by Jim202 »

jchabalie wrote:My fire company has 2 UHF CDM1250's with different model numbers (AAM25SKD9PW2AN and M25SKD9AA2A). Is there any way to program these with the same codeplug, or will I need to write the programming for each radio since they have different model numbers?



You can try cloning them, but the chances are the software will barf it out.

You could start up 2 copies of the software at the same time and do a click and drag from one to the other. You will probably have to clean up the zone info with the personalities and then if your using scan, you will have to clean up the scan info.

Unless you have a ton of frequencies, your almost better off just hand typing in all the information from scratch.

Jim
Top
User avatar
escomm
Queue Moderator
Posts: 5170
Joined: Fri Mar 24, 2006 8:24 pm

Re: CDM1250's With Different Model Numbers

Post by escomm »

Cannot clone since model numbers don't match
Top
User avatar
HLA
Posts: 2334
Joined: Mon Jul 11, 2005 8:15 pm
What radios do you own?: HT1550's, X9000's, CDM1550's

Re: CDM1250's With Different Model Numbers

Post by HLA »

no, sorry, those won't clone, I see alot of typing in your future.
HLA
I never check PM's so don't bother, just email me.
I won't reply to a hotmail, gmail, aol or any other generic free address, if you want me to reply use a real address.
STOP ASKING ME FOR SOFTWARE OR FIRMWARE, I JUST FORWARD ALL OF THE REQUESTS TO THE MODERATORS
Top
User avatar
wavetar
Administrator
Posts: 7341
Joined: Sun Sep 09, 2001 4:00 pm

Re: CDM1250's With Different Model Numbers

Post by wavetar »

Jim202 wrote: You could start up 2 copies of the software at the same time and do a click and drag from one to the other.
Jim
The professional series CPS has never been capable of 'drag and drop' operation...it's the biggest shortcoming of it. Manual typing it has to be.
No trees were harmed in the posting of this message...however an extraordinarily large number of electrons were horribly inconvenienced.

Welcome to the /\/\achine.
Top
User avatar
SteveC0625
Posts: 469
Joined: Sat Jan 01, 2011 9:46 am
What radios do you own?: CDM's, CP's, CM's, and more

Re: CDM1250's With Different Model Numbers

Post by SteveC0625 »

As long as the question is on the table, can anyone tell us what the PW means in the model number of the OP's radio: AAM25SKD9PW2AN? I don't find it in any charts that I have or can locate on the net. Thanks
Top
Post Reply

Return to “Radio Programming”