I want to program a Moto CDM1550 LS+ to receive an LTR system only and not transmit. My Kenwoods let me not put a TX ID and it won't TX, the CDM does not like that and not putting in transmit freqs. I don't want this to emit any RF if the PTT is pushed. Anyone have any advice?.
Thanks
CDM1550 LS+
Moderator: Queue Moderator
-
radioeng462
- No Longer Registered
- Posts: 38
- Joined: Sun Dec 26, 2010 6:38 am
-
HLA
- Posts: 2334
- Joined: Mon Jul 11, 2005 8:15 pm
- What radios do you own?: HT1550's, X9000's, CDM1550's
Re: CDM1550 LS+
First off do you have permission to be on that system? If so have the system administrator program your radio so it won't interfere their everyday use. If not then just use a trunking scanner.
HLA
I never check PM's so don't bother, just email me.
I won't reply to a hotmail, gmail, aol or any other generic free address, if you want me to reply use a real address.
STOP ASKING ME FOR SOFTWARE OR FIRMWARE, I JUST FORWARD ALL OF THE REQUESTS TO THE MODERATORS
I never check PM's so don't bother, just email me.
I won't reply to a hotmail, gmail, aol or any other generic free address, if you want me to reply use a real address.
STOP ASKING ME FOR SOFTWARE OR FIRMWARE, I JUST FORWARD ALL OF THE REQUESTS TO THE MODERATORS
-
N6LAU
- Posts: 382
- Joined: Mon Apr 14, 2008 12:42 am
- What radios do you own?: Talkabout-250 w/ P25 Phase 2
Re: CDM1550 LS+
I don't know if you can program it to not emit any RF when the PTT is pressed but you could always put in incorrect offsets in the TX section so if the PTT is accidentally pressed it won't interfere with the system.
Joe
Joe
Joe - N6LAU