CIM-1000 ANI board programming.

The General forum is where users can discuss any topic regarding Motorola communications equipment - hardware, software, etc. There are also several focused forums on this board, so please take the time to ensure that your questions doesn't fall into one of those categories before posting here!

Moderator: Queue Moderator

Post Reply
Elighting
Posts: 56
Joined: Tue Oct 15, 2002 5:59 pm
What radios do you own?: Kenwood and Motorola.

CIM-1000 ANI board programming.

Post by Elighting »

Does anyone here able to program a CIM-1000 ANI board for me? I have 2 and just need them programmed. Or I'm willing to pay the shipping both ways if someone would send me the programming cable. Hopefully this would the correct forum, since these board are some times used in Motorola radios.
Jordan.
Top
User avatar
Motoboy
Posts: 102
Joined: Wed Nov 11, 2009 1:58 pm
What radios do you own?: HT1250 I saved from the dump

Re: CIM-1000 ANI board programming.

Post by Motoboy »

Call Cimarron. If the boards are new, they will send you a cable for free. If not, you can build your own. I believe it is pins 2, 3, and 7 on a DB-9, ran out to clip leads which attach to the board. The board itself programs with HyperTerminal. Cimarron will at the very least send you programming instructions. They are very easy to deal with.
"I don't have a driver's license, either, and that never got me in trouble!" ~Customer
Top
Post Reply

Return to “General Motorola Solutions & Legacy Radio Discussion”