XTS2500i Power Up Issues

The General forum is where users can discuss any topic regarding Motorola communications equipment - hardware, software, etc. There are also several focused forums on this board, so please take the time to ensure that your questions doesn't fall into one of those categories before posting here!

Moderator: Queue Moderator

Post Reply
User avatar
tuckerm
Posts: 561
Joined: Thu Jun 10, 2010 12:21 pm

XTS2500i Power Up Issues

Post by tuckerm »

I was out on an all night fire scene with my radio last night. Temps were hovering around 10F. I was crawling underneath a deck to get to a basement window with the nozzle (nozzle was on a fog) to attempt to put it in the basement to cool it down (no other way into it at this point). Anyway, I had a whole bunch of water come rushing back on to my gear, including my radio. It also iced over a couple times from within the pocket as I kept getting water from the other attack team on me. Now my radio won't power up. I have taken the battery off of it and kept the radio at room temp for 8 hours now but it's still not working. When I turn it on, it says FAIL 01/A0. Thoughts?

Also, when I power it off, the LCD stays back lit.
Schrodinger's Radio: It is simultaneously too loud and too quiet, but you will never know which until someone transmits.
User avatar
MTS2000des
Posts: 3347
Joined: Sat Jan 04, 2003 4:59 pm
What radios do you own?: XTS2500, XTS5000, and MTS2000

Re: XTS2500i Power Up Issues

Post by MTS2000des »

sounds like water ingress. first if you haven't already, take the battery off!
second, open the radio and look for signs of water intrusion on the boards. if it is, use some denatured alcohol and clean it, let it dry thoroughly, re-assemble and attempt to power up.

one thing I cannot stress enough if there is water intrusion, leaving a battery on it WILL kill it or cause permanent damage.
The views here are my own and do not represent those of anyone else or the company, the boss, his wife, his dog or distant relatives.
tvsjr
Posts: 4118
Joined: Fri Nov 28, 2003 9:46 am

Re: XTS2500i Power Up Issues

Post by tvsjr »

01/A0 is an ABACUS Tune Failure. You definitely have water in the case. As MTS2K said, you need to pull the battery immediately (you should've done this as soon as you knew there was a problem), open the case, and dry everything out and clean it up with alcohol. If you're lucky, you'll be OK... otherwise, it's depot time.
User avatar
tuckerm
Posts: 561
Joined: Thu Jun 10, 2010 12:21 pm

Re: XTS2500i Power Up Issues

Post by tuckerm »

I did pull the battery out as soon as I noticed there was a problem with the radio. I put it in a bag of rice last night and let it sit over night. I put the battery in it this morning and all is well again. Works fine again.

I was under the impression that the i series was supposed to handle some water? By no means was the radio submerged, but it was definitely exposed to water and ice.
Schrodinger's Radio: It is simultaneously too loud and too quiet, but you will never know which until someone transmits.
User avatar
n7maq
Posts: 1440
Joined: Tue Nov 27, 2001 4:00 pm
What radios do you own?: Mocom 70 w/scan!!

Re: XTS2500i Power Up Issues

Post by n7maq »

tuckerm wrote:I did pull the battery out as soon as I noticed there was a problem with the radio. I put it in a bag of rice last night and let it sit over night. I put the battery in it this morning and all is well again. Works fine again.

I was under the impression that the i series was supposed to handle some water? By no means was the radio submerged, but it was definitely exposed to water and ice.
Good news on it working now, I would do further cleaning though.

The I rating is only good if it the radio has been maintained correctly, and that means every time it is opened the correct procedures need to be followed on re-assembly.

Jim
Post Reply

Return to “General Motorola Solutions & Legacy Radio Discussion”