NTN1340C

The General forum is where users can discuss any topic regarding Motorola communications equipment - hardware, software, etc. There are also several focused forums on this board, so please take the time to ensure that your questions doesn't fall into one of those categories before posting here!

Moderator: Queue Moderator

Post Reply
taylorfarms
New User
Posts: 1
Joined: Thu Jan 19, 2012 10:21 am

NTN1340C

Post by taylorfarms »

This is a stupid question i i am wanting to use the cradle only to charge and store mt mt200 when using on a module builder. Is this possible, and would also like to uc=se the external speaker and mic whne in the cradle. I dont have the amp for this . doable or not. Thanks michael
Top
User avatar
d119
Posts: 3538
Joined: Tue Mar 19, 2002 4:00 pm

Re: NTN1340C

Post by d119 »

Er, uh... What?
Top
User avatar
fineshot1
Posts: 1125
Joined: Wed Oct 12, 2005 5:13 am

Re: NTN1340C

Post by fineshot1 »

taylorfarms wrote:This is a stupid question i i am wanting to use the cradle only to charge and store mt mt200 when using on a module builder. Is this possible, and would also like to uc=se the external speaker and mic whne in the cradle. I dont have the amp for this . doable or not. Thanks michael
At the minimum you would need the NTN1322 - basic control unit and NKN6453 - interface cable
to make that work for you.

The control unit has the charging and audio amp electronics and the holder unit you have
is only just that a holder cradle for portable.
fineshot1
NJ USA
Top
Post Reply

Return to “General Motorola Solutions & Legacy Radio Discussion”