Current draw of the Astro Saber III

JerryS · Post by **JerryS** » Wed Jan 25, 2012 12:06 pm

I am looking for info on the amount of current that the Astro Saber III will draw when the radio is Transmitting.

I want to relocate the battery apart from the radio, and need to know the minimum AWG of wire that I should use.

Max length will be 1 meter

Thanks

BTW: The radio is VHF

maxkelley_kc2spy · Post by **maxkelley_kc2spy** » Wed Jan 25, 2012 2:47 pm

I would say about 2 amps maximum, closer to 1.5. 22AWG or even 24AWG will probably do just fine for you, at that short of a distance.

gopher · Post by **gopher** » Wed Jan 25, 2012 3:46 pm

http://batboard.batlabs.com/viewtopic.php?f=1&t=99097

JerryS · Post by **JerryS** » Wed Jan 25, 2012 8:53 pm

maxkelley_kc2spy wrote:I would say about 2 amps maximum, closer to 1.5. 22AWG or even 24AWG will probably do just fine for you, at that short of a distance.

Thanks Max, that wat I needed to know.

jerrys

JerryS · Post by **JerryS** » Wed Jan 25, 2012 8:56 pm

gopher wrote:http://batboard.batlabs.com/viewtopic.php?f=1&t=99097

Great info

Thanks
jerrys

Current draw of the Astro Saber III

Current draw of the Astro Saber III

Re: Current draw of the Astro Saber III

Re: Current draw of the Astro Saber III

Re: Current draw of the Astro Saber III

Re: Current draw of the Astro Saber III