The setup is this: Two MC2000 tone control remotes with channel steering hooked up to a CM300 through a remote adapter. All works well for tx/rx/steering. Is there a setting in RSS or a modification to make the remotes follow channel changes. That is, if remote "A" changes the channel, can remote "B" be made to indicate the change? I'M thinking no but there may be something I missed.
L.E.
MC2000 remotes
Moderator: Queue Moderator
-
Lake Effect
- Posts: 311
- Joined: Tue Dec 06, 2005 9:47 am
-
Lake Effect
- Posts: 311
- Joined: Tue Dec 06, 2005 9:47 am
Re: MC2000 remotes
Disregard. Got it.
L.E.
L.E.
-
maxkelley_kc2spy
- Posts: 160
- Joined: Fri May 01, 2009 2:30 am
- What radios do you own?: XTS2.5K-Q, ASpectra, MT2K
Re: MC2000 remotes
Care to post what it was, for future reference of others?
Max Kelley KC2SPY
http://www.maxkelley.com
MT2000 VHF & UHF A7, Visar UHF, ASII UHF, Maratrac UHF, Astro Spectra UHF, MCS2KIII 900, XTS2.5K-Q
http://www.maxkelley.com
MT2000 VHF & UHF A7, Visar UHF, ASII UHF, Maratrac UHF, Astro Spectra UHF, MCS2KIII 900, XTS2.5K-Q
-
Lake Effect
- Posts: 311
- Joined: Tue Dec 06, 2005 9:47 am
Re: MC2000 remotes
Nothing to post other than I was taking the customer's word that it did not track the other remote. Yesterday I made the trip to his location to try different things I had come up with and found it worked just fine. No changes needed. It seems to be built into the MC2000 standard operation.
L.E.
L.E.