HT600 speaker mics

[malblast]

I have some old HT600 speaker mics ( NMN6156A ). Has anyone been able to replace the cords and have them work on the two pin connection like a CP200 ?

[CircleBat]

they usually break at the bottom ontop of the strain relief.. usually cut it off and reconnect it.. not worth replacing the cords.. Might have some new old stock cords if interested..

circleBat

[JMINN]

It can be done. As I recall you will need to modify the spkmic circuit board. compare the two spk mic circuits and you will see the difference.

Joe

[CircleBat]

cp200/Ht600 cords are 2 different types of cords.. gp300 = 4 wire while HT600 = 6 wires

[CircleBat]

cp200/Ht600 cords are 2 different types of cords.. gp300 = 4 wire while HT600 = 6 wires