apx housing change
Moderator: Queue Moderator
-
Tom in D.C.
- Posts: 3859
- Joined: Tue Sep 04, 2001 4:00 pm
- What radios do you own?: Progreso soup can with CRT
Re: apx housing change
1. remove battery
2. remove screws in middle of case holding speaker to case
3. remove speaker cover
4. remove screws at top (open space at left top is for bluetooth module)
5. slowly wiggle the case so it comes away from the chassis. I can't remember
if the screws all the way at the bottom need to come out.
The above is based on my replacement of the half case which changes the color of
the side panels on a 7000, but it should be enough to get you started if you have to
replace the entire case.
2. remove screws in middle of case holding speaker to case
3. remove speaker cover
4. remove screws at top (open space at left top is for bluetooth module)
5. slowly wiggle the case so it comes away from the chassis. I can't remember
if the screws all the way at the bottom need to come out.
The above is based on my replacement of the half case which changes the color of
the side panels on a 7000, but it should be enough to get you started if you have to
replace the entire case.
Tom in D.C.
In 1920, the U.S. Post Office Department ruled
that children may not be sent by parcel post.
In 1920, the U.S. Post Office Department ruled
that children may not be sent by parcel post.