PM1500 MIc Connector Help

Post by **latinosusa** » Thu Jul 19, 2012 2:09 pm

Hi Everyone.
I Have a pm1500 radio witch i am going to use as a receiver only, but when i remove the mic it goes into squelch audio.
can any one tell me witch pins in the mic connector i am suppose to ground in order to mute the squelch?
Thanks for all your help.
God bless you.
Jose.

Post by **escomm** » Thu Jul 19, 2012 9:49 pm

This can be fixed with the CPS. Uncheck the box for HUB disables PL.

Post by **latinosusa** » Mon Jul 30, 2012 6:11 am

Thanks Escomm, it worked .
Thanksd.

HLA · Post by **HLA** » Mon Jul 30, 2012 12:04 pm

why wouldn't you just disable the ptt line? if you remove the mic the ptt is still enabled and it can still tx?

Will · Post by **Will** » Mon Jul 30, 2012 8:53 pm

HLA wrote:why wouldn't you just disable the ptt line? if you remove the mic the ptt is still enabled and it can still tx?

???? It IS a receive only radio, so the PTT is not active. And it seems that the OP said there is no mic with it.

HLA · Post by **HLA** » Tue Jul 31, 2012 6:32 pm

maybe I read it wrong, sounded more like he was using a speaker mic and wanted to know what to do to disable the mic in it?

PM1500 MIc Connector Help

PM1500 MIc Connector Help

Re: PM1500 MIc Connector Help

Re: PM1500 MIc Connector Help

Re: PM1500 MIc Connector Help

Re: PM1500 MIc Connector Help

Re: PM1500 MIc Connector Help