I have 2 gm300's 1 works great the other does not beep upon power up and it need the ignition sense wire while my good 1 does beep and no ignition sense.
I cloned the good one to the other one and same thing.The good one has audio on a simplex chnl but the other one does not
What am i doing wrong I want the beep and no ign sense.
Am i missing something here?
Any help greatly appriciated
Otto
GM300 Problem
Moderator: Queue Moderator
-
bayfire300
- Posts: 348
- Joined: Tue May 17, 2005 5:19 pm
Re: GM300 Problem
There's a fuse that needs to be added (or replaced if it's there but burnt out) inside the radio to get rid of ignition sense. This applies to the GM300 even though it's on the MaxTrac page: http://batlabs.com/maxrad.html#power.
As for no audio, it sounds like either the speaker's disconnected or bad.
As for no audio, it sounds like either the speaker's disconnected or bad.
-
SteveC0625
- Posts: 469
- Joined: Sat Jan 01, 2011 9:46 am
- What radios do you own?: CDM's, CP's, CM's, and more
Re: GM300 Problem
15 to 16 jumper maybe?KG4INW wrote:As for no audio, it sounds like either the speaker's disconnected or bad.
Re: GM300 Problem
You're right, could be that, forgot about it!
-
bayfire300
- Posts: 348
- Joined: Tue May 17, 2005 5:19 pm
Re: GM300 Problem
Great thanks.......i will look into that