I recently got a XTS 3000 and got it programmed, when received after turning on all that appears is the channel ID and a "OUT OF RANGE" message. Occasionally the out of range will disappear for a moment and pop up again. Accroding to the programmer all the programming is correct so i have been told that this is a bad RF Board, is this corrdct or something else?
Thanks
XTS 3000 Prgramming
Moderator: Queue Moderator
-
crazykid-01
- New User
- Posts: 1
- Joined: Tue Oct 23, 2012 9:05 am
-
Tom in D.C.
- Posts: 3859
- Joined: Tue Sep 04, 2001 4:00 pm
- What radios do you own?: Progreso soup can with CRT
Re: XTS 3000 Prgramming
"Out Of Range" also appears on trunked radio displays when the programmed data is incorrect, such as when an agency rebands its channels but you haven't modified the radio's control channels to match the new setup. Was your programming person certain that what was programmed into you radio was currently valid data?
Tom in D.C.
In 1920, the U.S. Post Office Department ruled
that children may not be sent by parcel post.
In 1920, the U.S. Post Office Department ruled
that children may not be sent by parcel post.
-
HLA
- Posts: 2334
- Joined: Mon Jul 11, 2005 8:15 pm
- What radios do you own?: HT1550's, X9000's, CDM1550's
Re: XTS 3000 Prgramming
do you have any simplex channels in the radio to test with? First make shure the radio is functioning correctly simplex or on a simple repeater
HLA
I never check PM's so don't bother, just email me.
I won't reply to a hotmail, gmail, aol or any other generic free address, if you want me to reply use a real address.
STOP ASKING ME FOR SOFTWARE OR FIRMWARE, I JUST FORWARD ALL OF THE REQUESTS TO THE MODERATORS
I never check PM's so don't bother, just email me.
I won't reply to a hotmail, gmail, aol or any other generic free address, if you want me to reply use a real address.
STOP ASKING ME FOR SOFTWARE OR FIRMWARE, I JUST FORWARD ALL OF THE REQUESTS TO THE MODERATORS