Multi-Unit Impres Charger Question

[N4DES]

If we want to add the display modules, do we have to do all of the slots at the same time or can I be selective and just do a few out of the 6?

M

[JeffFireRadio]

Any combination of them. Make sure you buy the right display module. If we're talking XTS charger, there was an early version of the display/board for the very early model of the charger. Check the XTS High Tier Catalog for the details before ordering. The display kit comes with super-easy instructions, btw. Good luck. -Jeff

[N4DES]

It is the XTS style and there are 2 postions with the APX cups inserted in it.
They are fairly new....< 1 year old.

[tdats]

We put a single display module into our charger. I had one extra from another project. It's nice to have the one display to check the battery data.

[JeffFireRadio]

And, if the charger is at a user location, it's fun to watch the feeding frenzy that ensues for "the good slot" once you've installed a display module.

[N4DES]

Thanks for the answers guys. We received a bunch of these in rebanding and would like to increase the capabilities of at least one that sits in our radio shop full time.