Operation Questions for NDN4005B BMS Battery Analyzer

The General forum is where users can discuss any topic regarding Motorola communications equipment - hardware, software, etc. There are also several focused forums on this board, so please take the time to ensure that your questions doesn't fall into one of those categories before posting here!

Moderator: Queue Moderator

Post Reply
wiscomm
Posts: 123
Joined: Sun Jun 13, 2004 7:05 am

Operation Questions for NDN4005B BMS Battery Analyzer

Post by wiscomm »

Hey Guys, quick and easy question here.

Just picked up a used NDN4005B Motorola BMS Conditioner. Can someone give me a quick run down on what each of the three buttons do? (various shades of the lightning bolt).

Thanks,

Craig
MKE
Grog
On Moderation
Posts: 783
Joined: Sat Nov 17, 2001 4:00 pm

Post by Grog »

Edit...You're a /\/\ dealer and you don't know :lol: J/K

Anyway....


From memory, but I'll double check when I get to work in three hours. I need to run one of my betteries through ours at work (one reason I use a Jedi for ham stuff, the ability to use work acesories :D )


The 1st is condition, three charge-discharge-charge cycles

The 2nd discharges, then charges

The 3rd does a charge-discharge-charge cycle....


I could probaby scan the manual this weekend and send them as JPEGs if you can't find a manual....
wiscomm
Posts: 123
Joined: Sun Jun 13, 2004 7:05 am

Post by wiscomm »

Thanks Grog, That is what I was able to conjure by reading the pictograms.

If you can scan the page that confirms that it would be awesome.

Craig
Grog
On Moderation
Posts: 783
Joined: Sat Nov 17, 2001 4:00 pm

Post by Grog »

wiscomm wrote:Thanks Grog, That is what I was able to conjure by reading the pictograms.

If you can scan the page that confirms that it would be awesome.

Craig
Ok, it will probably be this weekend when I have lots of extra time to play with the scanner....
Al
Posts: 1045
Joined: Tue Sep 04, 2001 4:00 pm

Post by Al »

One more thing you may want to know.....Depending on how old the firmware version is, it may do only NiCD batteries and not NiMH. How do you tell? Look down through the leftmost battery adapter hole in the top of the unit at the firmware chip....it'll have a label on it that will give the firmware version and probably also say "NiCd" or "NiCD and NiMH".
Grog
On Moderation
Posts: 783
Joined: Sat Nov 17, 2001 4:00 pm

Post by Grog »

Al wrote:One more thing you may want to know.....Depending on how old the firmware version is, it may do only NiCD batteries and not NiMH. How do you tell? Look down through the leftmost battery adapter hole in the top of the unit at the firmware chip....it'll have a label on it that will give the firmware version and probably also say "NiCd" or "NiCD and NiMH".
Good to know, I hven't looked at the one at work so I never knew. We (and I) only use NiCads so far, but I'll check anyway. I know the price difference in Saber cups fro nicad and nicad/nimh are big....
erica_nci
New User
Posts: 1
Joined: Tue Mar 19, 2013 8:04 am

Re: Operation Questions for NDN4005B BMS Battery Analyzer

Post by erica_nci »

Hi, this post is a little old, however my boss asked me to find a manual for the NDN4005B Motorola Battery Maintenance System and i've been all over the internet and cannot seem to find one. Does anyone have a copy? Any help would be greatly appreciated! Thanks!!
Post Reply

Return to “General Motorola Solutions & Legacy Radio Discussion”