Motorola Battery Maint. System Adapters

The General forum is where users can discuss any topic regarding Motorola communications equipment - hardware, software, etc. There are also several focused forums on this board, so please take the time to ensure that your questions doesn't fall into one of those categories before posting here!

Moderator: Queue Moderator

Post Reply
User avatar
Search
Posts: 103
Joined: Wed Oct 10, 2001 4:00 pm

Motorola Battery Maint. System Adapters

Post by Search »

Does anyone know if the Motorola BMS adapters are able to be used on the HME "System 90" battery maintainers? They look like they have the same plugs. If not, does anyone know where I could obtain one that would work on the HME "System 90" conditioner for an XTS3000 NiMh battery? TIA

-search
Top
User avatar
n7maq
Posts: 1440
Joined: Tue Nov 27, 2001 4:00 pm
What radios do you own?: Mocom 70 w/scan!!

Re: Motorola Battery Maint. System Adapters

Post by n7maq »

They are both built by Itech http://www.itecheng.com/ so I would assume yes if the firmware supports your batteries chemistry.

Jim
Top
ht2001968
New User
Posts: 3
Joined: Thu Apr 18, 2013 1:24 pm

Re: Motorola Battery Maint. System Adapters

Post by ht2001968 »

I have a bunch of and am using the HME, Motorola, Jbro and a few other names of this battery maintenance system. They are all made by the same manufacturer. Caution: I believe only soft version 9.0 or higher handles Lithium Ion batteries and usually you have to have a special adapter for the Li. I have many adapter cups from all 3 sources and they are all completely interchangeable.
Top
Post Reply

Return to “General Motorola Solutions & Legacy Radio Discussion”