CDM Not Scanning Selected Channel

This forum is for discussions regarding all aspects of Motorola radio programming, including hardware, computers, installation and use of RSS/CPS, firmware upgrades, and troubleshooting. There are subforums for discussions of codeplugs, and also for software/firmware release notes and issues.

Moderator: Queue Moderator

Post Reply
radmano
Batboard $upporter
Posts: 37
Joined: Sun Oct 21, 2001 4:00 pm

CDM Not Scanning Selected Channel

Post by radmano »

Programming CDM 1550 Conventional(R06.12.08). Have appropriate Scan List selected under Scan Tab for each personality in Zone.
I have 4 channels listed in the corresponding Scan List - these scan OK. Problem is that the manually selected channel(in that Zone) is not being included with the other scanned channels.
Any help appreciated. Thank you.
Top
User avatar
SteveC0625
Posts: 469
Joined: Sat Jan 01, 2011 9:46 am
What radios do you own?: CDM's, CP's, CM's, and more

Re: CDM Not Scanning Selected Channel

Post by SteveC0625 »

radmano wrote:Programming CDM 1550 Conventional(R06.12.08). Have appropriate Scan List selected under Scan Tab for each personality in Zone.
I have 4 channels listed in the corresponding Scan List - these scan OK. Problem is that the manually selected channel(in that Zone) is not being included with the other scanned channels.
Any help appreciated. Thank you.
In addition to the four channels you want to scan, make sure <Selected> is also in your scan list. If you want the selected channel
to be the priority channel, set Line 1 of the scan list to be Selected. It is one of the choices in the drop down list.
Image
Top
Post Reply

Return to “Radio Programming”