HT1250 UHF PA

The General forum is where users can discuss any topic regarding Motorola communications equipment - hardware, software, etc. There are also several focused forums on this board, so please take the time to ensure that your questions doesn't fall into one of those categories before posting here!

Moderator: Queue Moderator

Post Reply
User avatar
candrist
Posts: 99
Joined: Thu Jun 16, 2005 6:56 am
What radios do you own?: XPR5550/7550, MTS2000 800MHz

HT1250 UHF PA

Post by candrist »

I have an HT1250 that only puts out between 1 and .75 watts. The longer I hold the PTT the lower the power goes.

I am guessing that the PA is bad. Is there a way to test if it is bad? If not, does anybody have any suggestions.

I am willing to pay to have it fixed, or would be willing to purchase another HT1250 circuit board.

Regards,

Chris Andrist, KC7WSU
Top
CircleBat
Posts: 171
Joined: Mon Oct 08, 2007 3:11 pm

Re: HT1250 UHF PA

Post by CircleBat »

is it set on high power or low power.. sounds like a battery issue to me

CircleBat
Top
User avatar
candrist
Posts: 99
Joined: Thu Jun 16, 2005 6:56 am
What radios do you own?: XPR5550/7550, MTS2000 800MHz

Re: HT1250 UHF PA

Post by candrist »

I think I have tried it with several different batteries, but I am not sure. I will try all of my batteries and put it on the service monitor again and report back.

Regards,

Chris Andrist, KC7WSU
Top
Post Reply

Return to “General Motorola Solutions & Legacy Radio Discussion”