Hi Folks,
I'm looking for a cable that will do the above.
Before I go digging into schematics & building my own, I thought I'd see if anybody knows the part number, or by chance has schematics.
Perhaps someone has seen one... is it done by splitting a DB-25 cable to feed the two separate systems, or is it done like putting a Siren on an X9000 where the large block connectors plug together.
Thanks!
Tim
Astro Spectra + VRS + Siren Cable??
Moderator: Queue Moderator
-
- Posts: 383
- Joined: Mon Jun 05, 2006 4:12 am
Re: Astro Spectra + VRS + Siren Cable??
Depends on what type of VRS you are working with.
If you are using a VRS-EP then the X9000 T-Block style is what you want. That is a HKN4304. The VRS cable piggy backs to the HKN4304 cable allowing for a pass through of data for each device.
If you are using a VRS750 you need a Y-Cable, the part number is NKN6460 which is still available through Moto, albeit at a price of $300+ depending on supplier.
If you are using a VRS-EP then the X9000 T-Block style is what you want. That is a HKN4304. The VRS cable piggy backs to the HKN4304 cable allowing for a pass through of data for each device.
If you are using a VRS750 you need a Y-Cable, the part number is NKN6460 which is still available through Moto, albeit at a price of $300+ depending on supplier.
Re: Astro Spectra + VRS + Siren Cable??
The HKN6154B cable connects the VRS750 to the siren connector.