Spectra discriminator pin

Kenneth Jensen · Post by **Kenneth Jensen** » Tue Dec 10, 2013 6:06 am

Is it right that to connect a discriminator output on a Spectra to use pin11 for audio - and pin 8 as ground ?

Will · Post by **Will** » Tue Dec 10, 2013 12:55 pm

Yes, but it is right off the OP Amp and you need to decouple the DC with a capacitor.

Kenneth Jensen · Post by **Kenneth Jensen** » Tue Dec 10, 2013 1:55 pm

ok - is there a better place for a ground Will ?

Kenneth Jensen · Post by **Kenneth Jensen** » Fri Dec 13, 2013 3:15 am

Is there a better place for ground?
I dont know how to put on a capacitor...

Jim202 · Post by **Jim202** » Fri Dec 13, 2013 9:15 am

Kenneth Jensen wrote:Is there a better place for ground?
I dont know how to put on a capacitor...

The capacitor goes in series with the disc. tap point connection. It should be at least a 1.0 uf capacitor or larger.

Jim