The General forum is where users can discuss any topic regarding Motorola communications equipment - hardware, software, etc. There are also several focused forums on this board, so please take the time to ensure that your questions doesn't fall into one of those categories before posting here!
This is a "adaptor" for a CS option on MCS2000. That is the way it is listed on MOL. Still listed as new for about $100 USD. I cannot for the life of me or simple Google-Fu right now tell you what the CS option was however. Radio work without it being attached?
Here is pinout of that device courtesy of Batlabs.com
Pinout for the CS Option Connector
1 A+ CONT
2 +5V
3 2.1 MHz
4 GND
5 DISC
6 9.3
7 AFIC PRE-EMP OUT
8 ASFIC MIC AUD OUT
9 AUX RX IN1
10 UNIV IO
11 GND
12 RESET
13 C CTRL HD2/O KEYFAIL
14 AUX TX IN1
15 RX DATA/KID
16 RTS/DVP WE
17 CLK
18 SPI TX DATA
19 MISO
20 O JABBA INT/C DTMF DATA RDY
21 O JABBA SEL/C DTMF SEL
22 ASN INT/OPT TX
23 ASN SEL/OPT CTSB
24 N/C
25 RSSI
Hi!
Thanks for info. Radio was used in moscad sistem.
I swap it with HLN6412A accessory connector from GM900 and radio is working with that too.
Any chance to get RJ45 pinout ?