XTL5000 Last Channel Selected

This forum is for discussions regarding all aspects of Motorola radio programming, including hardware, computers, installation and use of RSS/CPS, firmware upgrades, and troubleshooting. There are subforums for discussions of codeplugs, and also for software/firmware release notes and issues.

Moderator: Queue Moderator

Post Reply
jbrian
Posts: 28
Joined: Tue Nov 13, 2001 4:00 pm
What radios do you own?: Motorola APX, HARRIS XL-200P

XTL5000 Last Channel Selected

Post by jbrian »

I am working on my XTL5000 VHF. I have added several more zones and channels and found that when I switch between zones the radio will reset to the channel number of the initial zone. I verified that it have the check box of "LAST CHANNEL SELECTED PER ZONE" selected. Any thoughts......

Thanks Justin
Top
User avatar
Mfire39
Moderator
Posts: 1331
Joined: Sat Jan 17, 2004 8:53 am
What radios do you own?: APX

Re: XTL5000 Last Channel Selected

Post by Mfire39 »

The power up on last selected mode feature was introduced in Host R10. I assume you have R10 or higher firmware in the radio?

-Marc
Stupidity creates job security!

If your radio has old firmware, programming it with the latest CPS will not add any new features unless you have the latest firmware to match..

CPS = Customer Programming Software, Not CPS Software.
Top
Post Reply

Return to “Radio Programming”