CDM1250 Paging Encoder

The General forum is where users can discuss any topic regarding Motorola communications equipment - hardware, software, etc. There are also several focused forums on this board, so please take the time to ensure that your questions doesn't fall into one of those categories before posting here!

Moderator: Queue Moderator

Post Reply
cptncable
Posts: 1
Joined: Sun Sep 17, 2006 10:48 am

CDM1250 Paging Encoder

Post by cptncable »

I have been asked to try to program a CDM1250 to act as a paging encoder. No big deal right? The issue is they need the cdm to be unattended, meaning upon change of state via contact closure they want the CDM to always send out a QCII page. Any help would be greatly appreciated.
Top
User avatar
Bill_G
Posts: 3087
Joined: Thu Sep 17, 2009 5:00 am

Re: CDM1250 Paging Encoder

Post by Bill_G »

Accy pins 3, 6, and 8 can be programmed for external call button 1 or 2. I've never done it. You'll have to experiment with it to see what else you need to do to activate it with a closure on the input.
Top
Post Reply

Return to “General Motorola Solutions & Legacy Radio Discussion”