Spectra Remote setup

sethg · Post by **sethg** » Tue Nov 27, 2001 8:37 pm

Converting a dash mount to a remote mount. I got the remote head kit without the cable. I took the current head off and tried to line up the pins on the "adapter" plate. They didn't want to line up. Maybe the board was in upside down...anyhelp would be great....also looking for the cable to go between...

Nick · Post by **Nick** » Tue Nov 27, 2001 8:53 pm

There's a difference between the Spectra and Astro Spectra "adapter" plates, have you got the right one??

Nick

sethg · Post by **sethg** » Tue Nov 27, 2001 8:55 pm

I do have to regular spectra plate....I think..

Bugs Bunny · Post by **Bugs Bunny** » Wed Nov 28, 2001 5:16 am

Stupid question but did you remove the interconnect board between the control head and the main chassis when you removed the head from the radio. The part number is I believe HLN6000B. Once this is removed the new faceplate can be installed.

Bugs

apco25 · Post by **apco25** » Wed Nov 28, 2001 8:17 pm

Ordered a spectra A7 remote control head back housing new from motorola a few months ago. The control head wouldn't mate with the connector, couldn't figure out why until I realized they assembled it backwards!