Astro 25 20.01.00 and Windows 10

This forum is for discussions regarding all aspects of Motorola radio programming, including hardware, computers, installation and use of RSS/CPS, firmware upgrades, and troubleshooting. There are subforums for discussions of codeplugs, and also for software/firmware release notes and issues.

Moderator: Queue Moderator

Post Reply
Andy2712
Posts: 113
Joined: Wed Jun 22, 2005 9:21 am
What radios do you own?: XTS2500 m3 VHF

Astro 25 20.01.00 and Windows 10

Post by Andy2712 »

I recently upgraded my programming computer to Windows 10. Since the upgrade I have been unable to read any radios (XTS2500 and XTS5000) with the Astro 25 20.01.00 software and my USB cable. The cable and same radios work fine on my desk top computer with the same software version and same cable. I'm thinking it must be a driver issue, but I can't seem to figure it out. Any one have any thoughts or suggestions?
Top
User avatar
tuckerm
Posts: 561
Joined: Thu Jun 10, 2010 12:21 pm

Re: Astro 25 20.01.00 and Windows 10

Post by tuckerm »

Uninstall, reinstall CPS. Make sure the proper driver is installed. Quite a few people have been having this issue.
Schrodinger's Radio: It is simultaneously too loud and too quiet, but you will never know which until someone transmits.
Top
Andy2712
Posts: 113
Joined: Wed Jun 22, 2005 9:21 am
What radios do you own?: XTS2500 m3 VHF

Re: Astro 25 20.01.00 and Windows 10

Post by Andy2712 »

That worked like a charm! Thank you, it was driving me nuts!
Top
Post Reply

Return to “Radio Programming”