Help with MCS 2000 800MHz

The General forum is where users can discuss any topic regarding Motorola communications equipment - hardware, software, etc. There are also several focused forums on this board, so please take the time to ensure that your questions doesn't fall into one of those categories before posting here!

Moderator: Queue Moderator

Post Reply
Max
Posts: 599
Joined: Wed Sep 05, 2001 4:00 pm

Post by Max »

I have a MCS 2000 800MHz I loaded a MTX 800 code plug into it by mistake.I have tryed everything i know possible to put the right cp back in,with no luck.I know theres not much RSS out there that can correct this problem.....any suggestions ?

Thanks
Max
Top
User avatar
wavetar
Administrator
Posts: 7341
Joined: Sun Sep 09, 2001 4:00 pm

Post by wavetar »

The only way you could've loaded an MTX800 codeplug into an MCS2000 was with some sort of LAB or Depot RSS. If you've been unsuccesful in dumping the proper archive back into it with the same RSS, I'd say you're screwed. To Motorola (or maybe someone like Monty - deal with many MCS's?) it must go.

Todd
Top
Post Reply

Return to “General Motorola Solutions & Legacy Radio Discussion”