Programming a NEW MT2000

The General forum is where users can discuss any topic regarding Motorola communications equipment - hardware, software, etc. There are also several focused forums on this board, so please take the time to ensure that your questions doesn't fall into one of those categories before posting here!

Moderator: Queue Moderator

Post Reply
Jay
Batboard $upporter
Posts: 723
Joined: Wed Sep 05, 2001 4:00 pm

Post by Jay »

Hello,

I've programmed a bunch of radios that all ready had data in the codeplug - but the newest one in my arsenal comes with UNPROGRAMMED on the display - so I assume nothing in it. Is there anything I need to do differently? Or do I just read the radio, and set it up as I would like? Thanks.

Jay
Top
Chris
Posts: 408
Joined: Wed Sep 05, 2001 4:00 pm

Post by Chris »

Just read the radio as normal and enter the data as normal. Assign personalities to zones and reprogram. "Unprogrammed" just means that there are no personalities slaved to the modes within a zone on a multi-zone radio such as an MT2000.

Good luck and have fun..Chris
Top
Post Reply

Return to “General Motorola Solutions & Legacy Radio Discussion”