Spectra A9 Head Part Numbers ???

DijitalLee · Post by **DijitalLee** » Sat Dec 29, 2001 7:37 pm

I am in need of an A9 control head for a Spectra radio. The one I have is part number HCN1073A. I have been offered one the is part number HCN1093D. Does anyone know what, if any, the difference is in these two control heads? Anyone have any pics? The one I have looks like this one:
<img src="http://66.134.33.220/A9.jpg">

Thanks.

DijitalLee · Post by **DijitalLee** » Sat Dec 29, 2001 9:25 pm

Mistake on the above part numbers:

I have a HCN1073A and need to know what a HCN1073D is. I accidently put 1093, sorry. Hope someone can help me out....

jmr061 · Post by **jmr061** » Sat Dec 29, 2001 9:26 pm

Yes a 1073D head will work with your spectra. There are numerous heads that will.
They all look pretty much the same except for ones with 3 rocker buttons on the bottom which are used for zone enabled radios and sometimes trunking.

Jason

<font size=-1>[ This Message was edited by: JMR964 on 2001-12-30 00:28 ]</font>

Post by **alex** » Sat Dec 29, 2001 9:46 pm

Check out http://www.batlabs.com/spectra.html to find out what model heads will work on the Spectra, and what their purposes are based... (rear head, etc...)

-Alex

DijitalLee · Post by **DijitalLee** » Sat Dec 29, 2001 9:51 pm

Thanks. I overlooked the info I needed on the Batlabs Spectra page. The answer was already there. Thanks to those that helped.