MT1000 'A' vs. 'B' Version?

smiller · Post by **smiller** » Thu Jan 03, 2002 9:11 am

Does anyone know what the difference is between the 'A' and 'B' version of the UHF MT1000? (i.e. H44GCU7100AN vs. H44GCU7100BN).

Thanks in advance...

10-95 · Post by **10-95** » Thu Jan 03, 2002 8:08 pm

Not real sure, i have not played with one in a while but I beleive the AN is non DTMF and the BN model may be DTMF.

Or it could apply to scan functions.

10-95

Keygun · Post by **Keygun** » Fri Jan 04, 2002 3:35 am

If i rember correct, "B"-models have Scan, "A"-models have none.

Keygun

smiller · Post by **smiller** » Fri Jan 04, 2002 8:04 am

Yes, I believe that you are correct... in fact, in the RSS software there is a notice on the scan programming page that only 'B' models are supported. Thanks for the tip!

PCSAR4x4652 · Post by **PCSAR4x4652** » Sat Jan 05, 2002 7:24 pm

the big difference is that an A model will not work the ENHANCED FEATURES of an enhanced contvertacom and the B model will. A model will work in it it but you won't get the ch display or other features, you have to use the radio's functions controls.

_________________
Todd Freeman
Pierce Co Sheriff Dept. SAR

[ This Message was edited by: PCSAR4x4652 on 2002-01-05 22:27 ]

phrawg · Post by **phrawg** » Mon Jan 07, 2002 12:51 pm

a,b,c,&d are simply the revisions of the radio's firmware. The reason that a b scans and an a doesnt is that // didnt want to give away the farm on the first run..
There is no corelation between a=non scan
b=scan etc, it is just when they decided to add the feature. ht1000;s and visars
have as high as d's. In other words a letter does not always mean a certain option
it simply means a change has been done. sometimes simply an improvement with no "new features" Phrawg