Hi,
Does anyone know the part number for the reference oscillator for a VHF saber?
These radios are too cool to just be collecting dust.
Elroy Jetson offered to sell me a couple, I accepted his offer but I have not been able to get a hold of him in over a month via private messages. I am still interested.
Thanks, Eric
Part Number for Saber Reference Oscillator
Moderator: Queue Moderator
The part identifier is U301 and the Motorola P/N's are:
NXN6268A 16.8 MHz 5 PPM
&
NXN6269A 16.8 MHz 2 PPM
The latter 2 PPM P/N appears to be an option.
It would work as well.
Also referring to the Motorola Sevice Manual on the installation, it referred to a square corner. Funny thing...I have misinstalled this module before and if you don't realize it you will be pulling your hair out over it!
Square corner always goes towards the center of the Saber for future reference.
Eddie Bryant
N4UMJ
Matthews, NC
NXN6268A 16.8 MHz 5 PPM
&
NXN6269A 16.8 MHz 2 PPM
The latter 2 PPM P/N appears to be an option.
It would work as well.
Also referring to the Motorola Sevice Manual on the installation, it referred to a square corner. Funny thing...I have misinstalled this module before and if you don't realize it you will be pulling your hair out over it!
Square corner always goes towards the center of the Saber for future reference.
Eddie Bryant
N4UMJ
Matthews, NC