m10 &m130 squelch problem

The General forum is where users can discuss any topic regarding Motorola communications equipment - hardware, software, etc. There are also several focused forums on this board, so please take the time to ensure that your questions doesn't fall into one of those categories before posting here!

Moderator: Queue Moderator

Post Reply
stvnd53
Posts: 168
Joined: Tue Jun 24, 2003 8:43 am

m10 &m130 squelch problem

Post by stvnd53 »

TRIED TO JOIN A M10 &M130 CROSSBAND W/O R*I*C*K.BOTH 16 PIN BUT M130 PIN 8 NO GO.SO NOW BOTH RADIOS NOW ARE FULL OPEN SQUELCH.ANY HINTS?
Top
Charlie
Posts: 109
Joined: Wed Oct 16, 2002 5:06 pm

RICK

Post by Charlie »

Best advice....use a RICK. They are easily available new and used and will make life so much easier for you. Without one, you will have several problems to contend with. There have been several posts on this subject previously. You might want to use the "search" function and the term "RICK".
Top
Post Reply

Return to “General Motorola Solutions & Legacy Radio Discussion”