Quick HT600 Model Number Decode Please

The General forum is where users can discuss any topic regarding Motorola communications equipment - hardware, software, etc. There are also several focused forums on this board, so please take the time to ensure that your questions doesn't fall into one of those categories before posting here!

Moderator: Queue Moderator

Post Reply
RapidCharger
Posts: 611
Joined: Thu Apr 10, 2003 5:11 pm

Quick HT600 Model Number Decode Please

Post by RapidCharger »

I have search all the previous messages/batlabs and was unable to find a model number decoder that corresponded to this model number anywhere.

H44SVU7160CN

I am trying to find out the band split.

And I even went to Panik's web site and he's got several ht600's listed with this very same model number but for different band splits. Anyone???

Thanks
RadioSouth
Batboard $upporter
Posts: 2884
Joined: Mon Sep 03, 2001 4:00 pm

Post by RadioSouth »

The model # only shows 6 ch. hi power UHF. For subband you need to either read the radio via RSS or open it up as the split is marked on the VCO under the ribbon cable.
Last edited by RadioSouth on Wed Jul 23, 2003 9:56 am, edited 1 time in total.
RapidCharger
Posts: 611
Joined: Thu Apr 10, 2003 5:11 pm

Post by RapidCharger »

that's what I was afraid of.

Yet for some unkown reason P200's do indicate the split in the model number.
User avatar
Dkouz
Batboard $upporter
Posts: 342
Joined: Wed Jun 19, 2002 6:42 pm

Post by Dkouz »

I don't know what you're smokin :D but none of the radios in the Genesis series have bandsplit id'ers in the model numbers. Infact I have several 146-162 AND several more 157-174 P200s, all of which have the same model numbers.
RapidCharger wrote:that's what I was afraid of.

Yet for some unkown reason P200's do indicate the split in the model number.
DKouz
User avatar
wa2zdy
Posts: 1744
Joined: Mon Jul 01, 2002 9:13 am

Post by wa2zdy »

Dkouz is correct. The Genesis series were all the same - no bandplit in the model number.

Not fun but it's the reality.
Chris,
Hamming 31 years
http://www.wa2zdy.com
Wesley Chapel, Pasco County, Florida
Snow? What's that?!
The human race is proof that Darwin was wrong.
RapidCharger
Posts: 611
Joined: Thu Apr 10, 2003 5:11 pm

Post by RapidCharger »

Dkouz wrote:I don't know what you're smokin :D but none of the radios in the Genesis series have bandsplit
I am smokin marijwanna that is rolled up in pages torn out of a 1992 Pagecom catalog (now Bearcom)

See the image below

It would seem as if the last number in the model # corresponds to the band split. EG: a "2" would mean 438-470
I suppose these could be internal model numbers, but the parts and acessories have actual model numbers so I am assuming these are actual model numbers.

I wonder also, is it safe to assume that a HT600 with a frequency of 453 in it currently is on the 438-470 split, or was there some screwy split for the ht600's like 450-460 or something?
Image
User avatar
Dkouz
Batboard $upporter
Posts: 342
Joined: Wed Jun 19, 2002 6:42 pm

Post by Dkouz »

RapidCharger wrote: I am smokin marijwanna that is rolled up in pages torn out of a 1992 Pagecom catalog (now Bearcom)

See the image below

It would seem as if the last number in the model # corresponds to the band split. EG: a "2" would mean 438-470
I suppose these could be internal model numbers, but the parts and acessories have actual model numbers so I am assuming these are actual model numbers.
Those are stock numbers, NOT model numbers. A Genesis model number comes in the form of: H43RFU7120BN This radio is a VHF, 5 watt, 2 channel 'B' revision radio.

RapidCharger wrote:I wonder also, is it safe to assume that a HT600 with a frequency of 453 in it currently is on the 438-470 split, or was there some screwy split for the ht600's like 450-460 or something?
A quick vist to Batlabs finds this page on the HT600/P200/MT1000 http://www.batlabs.com/ht6hack.html But the quick answer is yes, it is a 438-470 radio.
DKouz
RadioSouth
Batboard $upporter
Posts: 2884
Joined: Mon Sep 03, 2001 4:00 pm

Post by RadioSouth »

Like you said, internal model #'s are shown. Here's what I've observed on the P200/HT600 series:
H
4 (power level 3 lo, 4 hi)
4 (Band 3 VHF 4 UHF)
R
F (RFU for P200, SVU for HT600)
U
7
1
6 (6 for 6 ch. 2 for 2 ch.)
0
B (revision code have seen A,B,C)
N
User avatar
Monty
Administrator
Posts: 2613
Joined: Tue Sep 04, 2001 4:00 pm

Post by Monty »

HI:

In the HT600 Series, the only real way of
knowing for sure is to take the radio apart
and look at the VCO Block.

UHF HT600's for example can come in several
ranges like 403-430 Mhz, 438-470 Mhz, and
470 ~ 512 etc.

When examining the HT600 Radios, this is the only
way, as the Model Number is worth about as much
as the paper on the back

P200's on the other hand, do have the Freq Range
Listed as the photo shows:

Image

Anyhow, since the radios will fit in the same housing, even
I have found a low range radio being advertised as a Mid and
even High-Split radios.

Monty
Need help on a Program Cable or (/\/\) Rib Box ?
Contact me anytime/All availible / Free Support Info !

mail to: [email protected]
PLease avoid PM's whenever possible. Box gets too full.
Post Reply

Return to “General Motorola Solutions & Legacy Radio Discussion”