Page 1 of 1

Need help with MT2000 UHF

Posted: Thu Dec 08, 2011 11:19 am
by ad4y
Hello and thanks for reading I pick up this on ebay: Motorola MT2000 UHF Model #H01SDD9AA4N

so, I started to program it using rss version 6.08 mtsx and I was doing pretty good and it load the codeplug to the radio but here is the problem that I have now:

the radio is only doing simplex frequencies and it does not do duplex aka repeater frequencies, what could be wrong? I re-check everything and still getting no where I hope someone here can help me out and point me in the right direction and I can use the radio. The radio is on the 450-520 band but I have been told that it works without modification on the ham radio band.

73

thanks in advanced

Miguel-ad4y

Re: Need help with MT2000 UHF

Posted: Fri Dec 09, 2011 4:19 am
by ad4y
Problem solved, after many testing and searching and retracing steps, the problem was the rubber duck ht antenna had a bad connector, I tested with a outside antenna and bingo it works great no adjustment needed.

73

Miguel-ad4y