Motorola MTSX MVA Pinout

[benni473]

Hello,
i have got a Motorola NTN1340A MTSX Radioholder and a NTN1322B RF Connect Box but no cables.
Does anyone have a Pinout from the Interconnectcable between Holder an Connector Box??


Thanks!
Benni

[fineshot1]

Hello,
i have got a Motorola NTN1340A MTSX Radioholder and a NTN1322B RF Connect Box but no cables.
Does anyone have a Pinout from the Interconnectcable between Holder an Connector Box??

Thanks!
Benni

It is here on the batlabs web site - see below

http://www.batlabs.com/mtsx.html

BTW: The NTN1322B is a basic control unit (no rf amp) for the NTN1340 with no RF connections.

[benni473]

Hi,
I need the Control Unit Pinout, e.g. Ignition.. (no Infos on Batlabs about this Unit).

Thanks!
Benni

[fineshot1]

Hi,
I need the Control Unit Pinout, e.g. Ignition.. (no Infos on Batlabs about this Unit).

Thanks!
Benni

You will need to get a hold of a NKN6453A or NKN6454A i/f cable
and ohm it out to see if it is a straight through cable.

If it is a straight through cable then you have your answer.