Batboard

Hello everyone,
I have a Motorola MC2100 (model numeber: M01KHN9AN8AN), and while programming, has shut down (because of a short blackout) and later, my MC2100 is not turned on.
How can I fix this?
What has happened?
Waiting for your help, thank you in advance.

Vincenzo

Try to program it again!
If you can´t program it,you can fix it with the 2100 series lab upgradetool.
For this,you need a modified RIB or Unirib.

What shows the display on the corrupted radio?

Andreas

Thank you for having responded to me.
I've tried again to reprogram, but nothing happened.
The display shows nothing and it seems that the radio is dead.
I try to make a upgrade tool as you suggested.
I'll let you know. Thanks very much for your help.

Vincenzo

Hi,

You have to open radio and check flashrom reference, only 29C020 can be flashed with Andréas method, those with 28F020 use different voltage...

Good morning,
Now I get this message in the display: FILE 01/90
How can I fix it?
Thanks in advance.

Vincenzo

Create a new codeplug with the 2100 series DOS RSS and dump it in with MTSX-Lab or a native codeplug programmer.
Still problems?
Flash the radio again,convert the codeplug with MTSX-Lab or a native codeplug programmer into a s-record and use the 2100 series lab upgradetool,to program the s-record into your radio.
Program the internal and external codeplug.

Andreas

Ok Andreas, I try to do all this. I hope.
I'll let you know if everything went well.
Thanks, see you soon.

Vincenzo