MT2000 splinters

The General forum is where users can discuss any topic regarding Motorola communications equipment - hardware, software, etc. There are also several focused forums on this board, so please take the time to ensure that your questions doesn't fall into one of those categories before posting here!

Moderator: Queue Moderator

Post Reply
PETNRDX
Posts: 872
Joined: Sun Nov 25, 2001 4:00 pm
What radios do you own?: Too many

MT2000 splinters

Post by PETNRDX »

Tried researching this in the archives, and now more confused than before.
I thot I knew MT2000 and HT1000 well enuf to answer the question.
So, the question is, what version of MT2000 does the splinters to 2.5?
I believe the HT1000 had to be DN, is it the same with the MT?
Steve K.
Top
RadioSouth
Batboard $upporter
Posts: 2884
Joined: Mon Sep 03, 2001 4:00 pm

Re: MT2000 splinters

Post by RadioSouth »

With the MT2000 it comes down to firmware version. I've asked this in the past and I believe it was 2.11 or better to get 2.5 spacings.
Top
PETNRDX
Posts: 872
Joined: Sun Nov 25, 2001 4:00 pm
What radios do you own?: Too many

Re: MT2000 splinters

Post by PETNRDX »

So how do I verify the firmware version?
Steve K.
Top
RadioSouth
Batboard $upporter
Posts: 2884
Joined: Mon Sep 03, 2001 4:00 pm

Re: MT2000 splinters

Post by RadioSouth »

It's displayed in RSS or you can get it off the radio's screen thru the service mode.
Top
Post Reply

Return to “General Motorola Solutions & Legacy Radio Discussion”