Zetron 37-max programming

The General forum is where users can discuss any topic regarding Motorola communications equipment - hardware, software, etc. There are also several focused forums on this board, so please take the time to ensure that your questions doesn't fall into one of those categories before posting here!

Moderator: Queue Moderator

Post Reply
hamzagi
New User
Posts: 18
Joined: Tue Sep 27, 2011 5:57 am

Zetron 37-max programming

Post by hamzagi »

Hello,

I've bought a Zetron 37-max repeater pal to used with two GM340 radios in GR500 repeater.
the zetron can be programmed by DTMF radio, but I don't have radios with keypad
PLS, can someone help me for a solution ?

regards
Jim202
Posts: 3610
Joined: Sun Sep 09, 2001 4:00 pm

Re: Zetron 37-max programming

Post by Jim202 »

hamzagi wrote:Hello,

I've bought a Zetron 37-max repeater pal to used with two GM340 radios in GR500 repeater.
the zetron can be programmed by DTMF radio, but I don't have radios with keypad
PLS, can someone help me for a solution ?

regards


There are mics that have built in DTMF encoders. Be some what cautious though in using them. The deviation of the DTMF tones needs to be only about 30 to 50% of normal voice deviation. The reason for this is that the DTMF tones have to be kept out of compression to prevent distortion of the tones.

Jim
motorola_otaku
Posts: 1854
Joined: Tue Jan 13, 2004 7:03 am

Re: Zetron 37-max programming

Post by motorola_otaku »

Does it have a telco jack in the back that you can plug a regular POTS phone into for programming? I know the 38-series tone panels did.
hamzagi
New User
Posts: 18
Joined: Tue Sep 27, 2011 5:57 am

Re: Zetron 37-max programming

Post by hamzagi »

No, it does not
Post Reply

Return to “General Motorola Solutions & Legacy Radio Discussion”