Batboard

This may have been asked before but, can a 40 watt 6an CDM1550+ from a 25 watt 6an or do I have to do all the programming manually
Thanks
Steve

STEVE W wrote:This may have been asked before but, can a 40 watt 6an CDM1550+ from a 25 watt 6an or do I have to do all the programming manually
Thanks
Steve

I believe that if you start 2 software programs at the same time, you can click and drag the information from one radio to the other. Then write to the new radio with the info you dragged from the original radio. Then go into the new radio and clean up the scan channel information and personalities.

Jim

There is no drag and drop in the Pro Series CPS. You will need to copy the info over.