Hi,
I was programming 7 CDM1550SLS+ uhf and one of them simply died after programming. Basicly it never booted up again after the reboot signal was sent after the programming. Any idea if it's a common thing or i hit a bad apple ? Radio is no longer under warranty... They all have the same options, and serial numbers are following each others so they're from the same batch.
CDM1550LS+ Died after programming
Moderator: Queue Moderator
-
HLA
- Posts: 2334
- Joined: Mon Jul 11, 2005 8:15 pm
- What radios do you own?: HT1550's, X9000's, CDM1550's
Re: CDM1550LS+ Died after programming
put power to pin 10 on the back and see if that brings it back to life? You might of selected ignition sense in the programming
HLA
I never check PM's so don't bother, just email me.
I won't reply to a hotmail, gmail, aol or any other generic free address, if you want me to reply use a real address.
STOP ASKING ME FOR SOFTWARE OR FIRMWARE, I JUST FORWARD ALL OF THE REQUESTS TO THE MODERATORS
I never check PM's so don't bother, just email me.
I won't reply to a hotmail, gmail, aol or any other generic free address, if you want me to reply use a real address.
STOP ASKING ME FOR SOFTWARE OR FIRMWARE, I JUST FORWARD ALL OF THE REQUESTS TO THE MODERATORS
Re: CDM1550LS+ Died after programming
i tried with no luck.. 