Batboard

I try to program my old command star lite . But it can't read or write to it. When I connect it to cable and computer it show not found remote. What happen ? RSS to old or other ?

Trying connect CommandSTAR LITE <- -> CSDM and press any button and see the RSS display connect or not.

You may need to use a null modem adapter as well...

d119 wrote:You may need to use a null modem adapter as well...

What modem you prefer? Normaly it can use 9db pin prog cable? or I use wrong cable?

Thon725 wrote:

d119 wrote:You may need to use a null modem adapter as well...

What modem you prefer? Normaly it can use 9db pin prog cable? or I use wrong cable?

"Null modem cable" means pins 2 & 3 are crossed over, not a straight through serial cable.

http://digital.ni.com/public.nsf/allkb/ ... 720071DECF

wavetar wrote:

Thon725 wrote:

d119 wrote:You may need to use a null modem adapter as well...

What modem you prefer? Normaly it can use 9db pin prog cable? or I use wrong cable?

"Null modem cable" means pins 2 & 3 are crossed over, not a straight through serial cable.

http://digital.ni.com/public.nsf/allkb/ ... 720071DECF

I use quantar cable is same as your said to read it but it not work. How many version of rss and firmware version?

There are quite a few different versions. If you contact Motorola (or maybe even CML, they are the OEM of that thing), tell them your firmware version, they can tell you which CSDM Lite version you need to use.