XTX5000 will not decode MDC

This forum is for discussions regarding all aspects of Motorola radio programming, including hardware, computers, installation and use of RSS/CPS, firmware upgrades, and troubleshooting. There are subforums for discussions of codeplugs, and also for software/firmware release notes and issues.

Moderator: Queue Moderator

Post Reply
stevez494
New User
Posts: 14
Joined: Thu Sep 06, 2012 8:01 pm

XTX5000 will not decode MDC

Post by stevez494 »

I'm attempting to ONLY decode a P25 public safety system.

The flashcode is: 100008-000482-7

I presume I should be able to decode MDC with this flashcode?

If so, then I obviously am missing something in the programming setup.

I'm using version 18.00.01 CPS. XTS5000 is model H18QDF9PW6AN.

Any advice/assistance will be most appreciated.
Top
User avatar
Mfire39
Moderator
Posts: 1331
Joined: Sat Jan 17, 2004 8:53 am
What radios do you own?: APX

Re: XTX5000 will not decode MDC

Post by Mfire39 »

You need flash option H14 ID Display in your flashcode for it to decode ID's..


-Marc
Stupidity creates job security!

If your radio has old firmware, programming it with the latest CPS will not add any new features unless you have the latest firmware to match..

CPS = Customer Programming Software, Not CPS Software.
Top
stevez494
New User
Posts: 14
Joined: Thu Sep 06, 2012 8:01 pm

Re: XTX5000 will not decode MDC

Post by stevez494 »

That solves THAT "mystery." Thanks for the reply Marc!

Steve
Top
Post Reply

Return to “Radio Programming”