EFJ Johnson LOUD Hum...

This forum is for discussions regarding all aspects of Motorola radio programming, including hardware, computers, installation and use of RSS/CPS, firmware upgrades, and troubleshooting. There are subforums for discussions of codeplugs, and also for software/firmware release notes and issues.

Moderator: Queue Moderator

Post Reply
User avatar
kg6bki
Posts: 1209
Joined: Sun Aug 17, 2003 1:49 am

EFJ Johnson LOUD Hum...

Post by kg6bki »

About 6 months ago our work Dispatch Center Suffered a Major power failure and power was lost to our EF Johnson Base Station 900Mhz Radios. When the power came back online when the radios TX is pressed there is a Very Strong and Loud HUM on the Signal and the Audio of the Dispatcher is Low…Attached is a clip of the Audio…Can anyone guess what Happened…Solution would be to replace Radio all together but would like a possible fix if there is one..

Audio here

https://drive.google.com/file/d/0B7RhHE ... sp=sharing
Will
Posts: 6823
Joined: Tue Sep 04, 2001 4:00 pm

Re: EFJ Johnson LOUD Hum...

Post by Will »

Bad power supply, the first thing to check. If it is buzzing that loud, you should see AC ripple on a AC voltmeter.
Post Reply

Return to “Radio Programming”